What is Pump Cavitation and How Do I Avoid It?

Improving Chemical Blending and Safety with Industrial Powder Mixers

Valve Selection for Slurry Service: Not a Perfect Science

5 Tell Tale Signs of a Shady Pump Repair Shop

Aseptic Valve or Hygienic Valve, what’s the difference?

What Happens When A CIP System No Longer Cuts the Sauce

Why Check Valves Slam and What To Do About It

Creating Predictive and Preventive Maintenance Plans for Pumps

4 Tips to Prevent Diaphragm Failure on AODD Pumps

4 Reasons Not To Go It Alone With Process Skid Systems

Why An Inline Centrifugal Pump May Be Your Next Best Pump Selection

5 Essential Pieces to a Solid Pump Reliability Strategy

Why Companies Are Paying User Fees For Industrial Wastewater Treatment

Do I Need To Balance A Brand New Impeller?

How To Keep A Lift Station In Service During A Power Outage

Ultimate Gift Giving Guide For Maintenance Teams

Oversized Blowers? How To Save on Energy Costs

Pros and Cons of 2 Check Valves Types

Does Pressure Pulsation from your Centrifugal Pump Cause Damage?

You Choose: Frame Mounted vs. Close Coupled Pumps

Podcast: Crane Engineering's Wastewater Treatment Project in Africa

Dairy Plant's Problematic Process Finally Fixed after 25 Years!

3 Ways To Align a Centrifugal Pump

Valve Guidelines for Sanitary Applications (CIP/COP)

Dairy Gets Fed Up with Flooding Dry Pit and Drowning Centrifugal Pumps

Divisions and Classes on Motors – What Do They Mean?

How a Dairy Processor Cut Cocoa Powder Waste and Saved Over $100K

Wet Prime vs. Dry Prime - Which is Right for You?

What is a Double Block and Bleed Valve?

Why Am I Going Through Couplings So Fast?

The Most Popular Blog Posts of 2017

How to Select the Proper Blower for Your Wastewater Treatment

How A Self Cleaning Filter Saved Thousands in Maintenance Costs

Which Positive Displacement Pump Is Best For Wastewater Sludge?

Which Pump Motor Enclosure Do I Need?

Which Impellers are Best for Slurry Pump Applications?

What is a Foot Valve?

Terms You Need To Know For Packing Installation In Centrifugal Pumps

How Does Fluid Temperature Affect NPSH, and Why is it Important?

6 Things To Look For In A Slurry Valve

What Is a Centrifugal Pump Minimum Flow Bypass Line?

Why Does My Pump’s Performance Differ From Its Published Curve?

Can A Centrifugal Pump Run Backward?

Leaking Mechanical Seal? Think Twice Before Tightening

Does My Pump Need To Be Primed?

How To Read A Multistage Pump Curve

5 Ways To Kill A Mechanical Seal During Installation

What's Best For Wastewater Solids Reduction? Sewage Grinder or Macerator?

Video Product Review: ITT PumpSmart PS220

Why Multistage Pumps Are Best For Boiler Feed Applications

Pros and Cons of Below Grade Wastewater Pumps

Hazards Of Vertically Mounting Centrifugal Pumps

What To Consider When Selecting Pump Couplings

7 Reasons Centrifugal Pump Shafts Break

Booted, Molded, or Cartridge: Which is the Best Seat for Butterfly Valves?

What's The Difference Between Open, Semi-Open, and Closed Impellers?

The Best Level Transmitter For Foam

Before You Order That Direct Replacement Pump...

The Quick And Dirty Guide To Pump Coupling Types

Why Cast Iron Makes An Awful Abrasive Slurry Pump

Gorman-Rupp Eradicator Product Review

When Should I Use A 3 Piece Ball Valve?

3 Causes of Coupling Failure In Pumps

How to Extend Mechanical Seal Life on Slurry Pumps

How Pipe Flushing Time Was Cut By 50% With A Unique Flushing Skid

Food Safety Starts with People

How To Select The Best Slurry Pump

Should I Use Pumps In Series Or A Multistage Centrifugal Pump?

Why You Shouldn't Replace A Gorman-Rupp Classic T With Another Classic T

The ASCE Infrastructure Report Card Is Out.. And It's Not Pretty.

Can A Ball Valve Be Used As a Control Valve?

A Municipality’s “Classic” Ragging Problem Requires A “Super” Pump Solution

What's Different About Zero, Double and Triple Offset Butterfly Valves?

Arrow On Knife Gate Valve Means Direction of Flow? Maybe Not.

What Is A Multistage Centrifugal Pump Used For?

Three Disasters to Avoid With Your First Big Data Project

How To Select Pressure Regulator Trim For Your Process

Sensorless Pump Control – Sensible For Your Process?

Abrasive Application Too Much For AODD Pump

Extra Goulds Pump Parts After My Repair... That’s Cool, Right?

Punctured Sewage Force Main Requires Innovative, Creative Solution

How To Plan For Your Next Industrial Flooring Project

Mixing Tank Geometry: It's All About That Base

Preventative Maintenance for Long Term Pump Storage

The Most Read Blog Posts of 2016

Food Processing Plant Reroutes Wastewater Process to Improve Efficiency

3 Times When "Expensive" OEM-Parts Saved Money

Valve Sizing: What Are Safety Factors?

Understanding How Tank Geometry Affects Industrial Mixing

7 Things To Consider Before Switching to Non-OEM Parts

What's The Difference Between Cutter, Chopper and Grinder Pumps?

How Precision Maintenance Revealed The Source Of Pump Failures

Preventative Maintenance For Valves

Baffled By Baffle Size For Industrial Mixing?

Keeping Workers Safe With Smarter Industrial Flooring

FSMA Regulations For Pet Food - Is Your Industrial Flooring Compliant?

Are Your Valves The Source Of Fugitive Emissions?

6 Favorite Videos To Help Understand Fluid Process Challenges

Bookmark This! Crane Engineers' Favorite Pump Related Resources

Does My Industrial Mixer Need 2 Impellers?

Why Does a Self-Priming Pump Lose Prime During Operation?

A Change In Filtration Equipment Helps Increase Production By 305%

When To Use Metal Seat Valves Vs. Soft Seat Ball Valves

Why Your Centrifugal Pump is Drawing Too Much Power

When Can Butterfly Valves Be Used As Control Valves?

How Do Laser Aligned Pumps Become Misaligned During Operation?

What's The Difference Between A Flush Line And A Suckback Line?

What is the API Pump Standard?

What is your Ideal Epoxy Floor Coating Thickness?

Gear Pump Selection For Resins

Do You Need General Service or High Performance Butterfly Valves?

Pump Selection For Paint Handling Applications

How To Reduce Mechanical Seal Water Usage

How One Municipality Canned Their Vacuum Prime Can Lift Station

How Industrial Wastewater Producers Can Reduce "User Fees"

Should You Be Using A Makedown System To Blend Your Own Chemicals?

What I Learned During My Internship at Crane Engineering

Why Industrial Floor Coatings Means Happier Forklift Drivers

Positive Displacement Pumps for Metering Applications

When To Install A Split Mechanical Seal

How A Local Pool Used Epoxy Coating To Cut Water Usage By 92%

Slideshare: Pros/Cons of Rotary Positive Displacement Pumps

VIDEO: Schoeneck Container Uses i-Alert2 To Prevent Failure

How Baseplate Installation Affects Reliability of Centrifugal Pumps

Thermal Expansion and your Asphalt Gear Pump

Are Gear Pumps Right for Your Metering Application?

Benefits of Pumping In Series with Centrifugal Pumps

Selecting The Right Relief Valve For Gear Pumps

How Temperature Affects Mag Drive Pumps

Pressure Regulator Droop and 5 Ways to Minimize It

Why A Reactive Maintenance Plan Is A Bad Idea For Pumps

How to Choose a Fail-Safe Position for your Valves

8 Reasons Your Centrifugal Pump Has Low Flow

Basics of Valve Positioners

How Critical Pump Failure Was Avoided With i-Alert2 Technology

Safely Cleaning Clarifiers: Taming A “Real Beast”

Impeller Types for Ragging and Solids

Reducing Air Loss With Smart Valve Positioners

My Industrial Mixer Shaft Won't Turn, What's Wrong?

Why Do I Need A Piping Expansion Joint?

VIDEO: ITT i-ALERT2 Demo by ITT Goulds Pumps at Tech Expo

No Tech Expo 2016? 5 Things You Missed

Why You Need to be at Crane Engineering Tech Expo 2016!

My Industrial Mixer Is Noisy! What's Wrong?

VIDEO: ITT i-Alert2 - Beyond Condition Monitoring

VIDEO: Why Maintenance Personnel Love The New i-ALERT2

Dealing With Old Lift Stations That Are Barely Stayin’ Alive

VIDEO: Hunting Valve Positioner? Don’t Pull the Valve Just Yet!

How Valve Automation Keeps Water Flowing Without Electricity

My Mixer Is Leaking Oil. What’s Wrong?

Shop Towel Flusher Causes Major Submersible Pump Clogs

Difference Between “Sanitary (COP System)” and “CIP-able”

What’s a Flush Plan, And Why Should I Care?

Food Plant Cuts Energy Costs By 50% With Water Booster System

Factors to Consider When Selecting a Valve

Which Coating is Best for Water and Wastewater Treatment?

Why Some Water Booster Systems Are Energy Wasters

Is Minimum Submergence With Industrial Mixers A Big Deal?

5 Reasons You Must Attend Crane Engineering Tech Expo

The Difference Between NPSHr and Minimum Submergence

The Difference between Single and Double Mechanical Seals

Why Applying Band-Aids to Water Booster Systems Doesn't Work

How to Prevent Adhesives from Building Up On Packing Gland

Lost Split Case Pump Efficiency? It Could be Rust Tubercles

7 Important Steps For a Perfect Floor Coating Installation

Why Are My Water Booster Pumps Not Keeping Up With Demand?

10 Reasons to Install a Valve Positioner

Lower Viscosity Means Less Flow With Gear Pumps?

How to Size a Control Valve And Why It's Important

7 Ways To Tell If Your Lift Station Needs Rehabilitation

How To Avoid Air Bubbles While Pumping Adhesives

The Effects Of Mechanical Seal Failure On Centrifugal Pumps

A Race To Repair Chemical Corrosion In A Confined Space

VIDEO: How To Read A Centrifugal Pump Curve

How Do Air Operated Double Diaphragm Pumps Work?

6 Tips for Extended Floor Coating Life

How Can You Get More Flow Out Of A Gear Pump?

What is a Suckback on a Gear Pump?

New Progressive Cavity Pump Design Is Easy to Maintain

How To Optimize Clean in Place (CIP) Processes

Preventing Water Hammer with Non-Slam Check Valves

Why Ordering Direct Replacement Pumps Could Be Costing You

Mixing Faster Doesn't Mean Mixing Better

Ouch! 5 Tips For Avoiding Pipe Strain

How a Cheesemaker Dealt With Concrete Erosion and Corrosive Chemicals

How To Get Steadier Flow Using Pulsation Dampeners

Quiz: How Well Do You Know Non-Newtonian Fluids?

What Are Newtonian and Non-Newtonian Fluids?

What's the Difference Between Linear and Rotary in a Control Valve?

Why Looking Inside Tank Is Worst Way To Evaluate Your Industrial Mixer

How A Dairy Made Concrete Repairs Without Putting Truck Bays Out To Pasture

What is Flow Coefficient (Cv), and Why You Should Care

Quick And Dirty Guide to Vane Pumps

My Top 4 Technologies from WEFTEC 2015

9 Considerations for Sizing & Selecting a Metering Pump

Why WEFTEC's Opening General Session Is A Can't Miss

Choosing The Right Industrial Floor Coatings for Manufacturing Environments

Headed to WEFTEC? 5 Agenda Must-Haves

When To Use Wedge Wire vs. Perforated Filtration Elements

Quick and Dirty Guide to Air Release Valves

9 Important Things Gauges Can Tell You About Centrifugal Pumps

What The Heck Is A Solenoid Valve?

3 Smart Industrial Flooring Tactics For Improving Workplace Safety

Gorman-Rupp Releases Upgrade Kit to Combat "New Sewage" Pump Clogs

Wait! Don’t Trash That Internal Gear Pump…

6 Reasons Your Self-Priming Pump Won’t Prime

5 Technologies To Detect and Prevent Pump Cavitation

5 Questions You Need To Answer for Best Sanitary Strainer Selection

Settled Out Sludge Causes Fiberglass Tank Corrosion, Repair

Air Entrainment Or Pump Cavitation?

Why Slotted Wedge Wire Is Paper Industry's Go-To Filtration Element

4 Ways To Kill A Rotary Lobe Pump

Quick and Dirty Guide to Valve Actuators

4 Busted Confined Space Myths

Adhesives 101: Raw Materials & Pump Selection Properties

Regrouting Dairy Brick? Why You Should Replace With Epoxy Floor Coating

4 Tips for Getting the Most Out of Your COP System

5 Reasons to Install A Valve Actuator

5 Tips For Getting The Most Out Of Your CIP System

That's How The Concrete Crumbles: When Ice Melt Causes Concrete Repair

3 Packaged Pump Systems To Consider For Water and Wastewater Treatment

The Biggest Greasy Rag Fatbergs On The Internet

A Containment Area's Puddle Problem Sends Maintenance For A Solution

Have an iPhone, and Goulds Pumps? You need to read this.

9 Recommendations For A Perfect Tank Lining Application

Introduction to Mixer Impellers & Flow Patterns

Centrifugal Pumps: The Bigger, The Better?

Cottonwood Seeds Are Back! How To Keep It From Affecting Your Equipment

Stop Slamming the Check Valve!

Didn't Attend Crane Engineering Tech Expo? 5 Things You Missed

Quiz: Think You Know Valves?

6 Common Pitfalls for Pumping Chocolate

4 Tips For Better Materials of Construction Selection

4 Signs Of Imminent Mechanical Seal Failure

The Quick And Dirty Guide To Vertical Turbine Pumps

The Anatomy Of An Ideal Slurry Service Valve

How A Chemical Manufacturer Fixed A Mixing Bottleneck

Quiz: Think You Know Centrifugal Pumps?

How One Sanitary District Freed Itself From A “Bog” Of Greasy Rags

Minimum Submergence of Vertical Turbine Pumps: A Hero’s Weakness

Sick Of Ragging? How One WWTP Put The Kibash On A Rag Plagued Pump

Introduction To Self Cleaning Filters & Strainers

9 System Changes That Screw With NPSH

The Quick And Dirty Guide to Globe Valves

How A Wastewater Superintendent Made His Clarifier Safer, Run Better

6 Potential Reasons Your Centrifugal Pump (and System) Is Inefficient

What's Wrong With My Mechanical Seal? 4 Common Problems And Causes

The Quick And Dirty Guide To Check Valves

This Operator Takes Action When Screw Pump Shows Signs Of Failure

Answers To 6 FAQs About COP and CIP Systems

PUMPS DON'T SUCK! And Other Centrifugal Pump Basics

Gold Rush! Gorman-Rupp Opens Up About Mining And Pumps On Hit TV Show

4 Reasons You Have Entrained Air In Your Pumping System

4 Reasons Why Bearings Fail

Why Viscous Fluid Is The Centrifugal Pump's Kryptonite

The Truth Behind Lubrication & Over Greasing

How To Operate Centrifugal Pumps In Series Or Parallel

Conserving With Water Filtration In Manufacturing

3 Answers To Frequently Asked Questions About Pulsation Dampeners

Know Your ANSI From ASME - Decoding Acronyms In Manufacturing

WWII Submarine Pump Surfaces For Repair

A Beginner's Guide To Pumping Slurry

Ask Me Anything:3 Answers To Your Questions On Pulsation, Water Hammer

7 Considerations for Mechanical Seal Selection

How A Leaky Seal Revealed A Pump's Back Pressure Problem

Cartridge Seals: The Modern Alternative to Conventional Seals

What Is Water Hammer?

6 Reasons Why Mechanical Seals Fail

Pumping With VFDs - Don't Be Left Without Torque

Your Simple Guide to Mixproof Valves

The Quick And Dirty Guide To The Magnetic Drive Pump

3 Calculators For Water Hammer And Pressure Drop

6 Factors for Sizing & Selecting a Filter or Strainer

Aging Wastewater Clarifier? What To Do About It

The Quick And Dirty Guide To Progressive Cavity Pumps

5 Filtration Technologies You Need To Know

Code Blue! 3 Signs Your Clarifier Is Running On Borrowed Time

Filtration 101: Why Should You Filter Your Water For Manufacturing?

The Quick and Dirty Guide to the Diaphragm Pump

Silence Of the Fans: How Vibration Analysis Quieted An Obnoxious Noise

Service Team Stories: A Pump Imbalance Story You Won't Forget

4 Solids Handling Technologies We Love For Tackling Rags

How One Maintenance Team Cracked The Code On A Pump Pressure Problem

Understanding The Basics of Mechanical Seals Vs. Packing

Gate Valves and Knife Gate Valves: Isn't One Just Sharper?

False Advertising And 3A: How To Tell If It's Really 3A Certified

The Quick and Dirty Guide to Peristaltic Pumps

CIP And COP Systems: The Simple Definitions

The Quick And Dirty Guide To Rotary Lobe Pumps

The 6 Commandments Of Pump Installation

5 Basic Rules of Pump Piping

5 Ways To Kill Your Centrifugal Pump

The Quick And Dirty Guide To External Gear Pumps

The Quick and Dirty Guide to Internal Gear Pumps

Food Safety Modernization Act (FSMA) and What It Means For You

The Effects of Viscosity On Systems And Pump Selection

Introduction to Screens In Wastewater Treatment

How To Use Affinity Laws to Calculate A New Best Efficiency Point

The Untold Story of Pump Performance Curves & Reliability

5 Answers To The Most Frequently Asked Industrial Mixing Questions

8 Best Practices for Pumping Sodium Hypochlorite (Bleach)

Tips and Tools For Better Chemical Compatibility and Pump Selection

What No One Tells You About Clean-in-Place (CIP) Systems

6 Signs You Need A VFD (Variable Frequency Drive)

4 Smart Strategies For Optimizing Total Cost of Ownership

5 Reasons To Choose A Positive Displacement Pump

Valves: Flow to Open (FTO) vs. Flow to Close (FTC)

7 Essential Variables For Pump Selection

How To Read A Positive Displacement Pump Curve

Failed Mechanical Seal Makes Cold Storage Facility Hot For Solution

4 Things To Consider When Planning Your Epoxy Floor Coating Project

Selecting a Seal Flush Piping Plan for Your Single Mechanical Seal

Why Am I Getting Low Flow and Pressure From A High Pressure Pump?

Blinding and Blow Outs. When A Good Self Cleaning Filter Goes Bad

5 Things You Must Know For Sizing a Pressure Regulator, Correctly!

How To Read A Centrifugal Pump Curve

How A Paper Mill Found The Right Mechanical Seal For A Pulper

It’s a Toilet, NOT a Trash Can! Preventing Clogged Centrifugal Pumps

Noisy, Vibrating, Centrifugal Pump? Maybe The Pump Isn't To Blame

5 Cutting Edge Resources from SANDPIPER and Viking Pump

Preventing Cottonwood Seeds From Affecting Your Cooling Tower

Blog Search

Popular Posts

Share This