A dairy processor was losing valuable cocoa powder with every batch of chocolate milk. By upgrading to a Fristam Powder Mixer, the processor eliminated product waste, improved mixing efficiency, and saved more
than $117,000 annually.
An Iowa-based dairy processor was producing chocolate milk for school cafeterias and retail distribution in single-serve cartons, pints, and half-gallon containers. The production process involved mixing milk, liquid sugar, and cocoa powder in a batch tank using a Tri-Blend style mixer. However, the existing equipment wasn't fully dispersing the cocoa powder.
After each batch, approximately 30 pounds of undissolved cocoa powder remained at the bottom of the tank. At $150 per batch, that meant valuable product was being rinsed down the drain. The processor also needed additional recirculation time and extra cocoa powder to achieve the desired consistency. With three batches produced daily, the ongoing waste added up quickly. The processor needed a more effective mixing solution.
To address the problem, Fristam recommended replacing the existing Tri-Blend style mixer with a Fristam Powder Mixer. Unlike conventional powder induction methods that rely on gravity, vortex, or Venturi principles, the Fristam Powder Mixer uses vacuum to consistently draw powder into the liquid stream.
The system also incorporates an FS Shear Blender, which uses high tip speeds and close clearances to create effective, highly turbulent mixing.
This approach offered several advantages:
The Results: $117,000 in Annual Savings
After installing the Fristam Powder Mixer, the dairy processor saw immediate improvements. The powder induction funnel no longer plugged, allowing cocoa powder to be added faster and more consistently. The system also fully dispersed the powder on the first pass, eliminating the need for additional recirculation and the extra 30 pounds of cocoa powder previously added to each batch. Most importantly, the processor no longer found a layer of wasted cocoa powder at the bottom of the tank.
The financial impact was significant:
The equipment paid for itself through savings in ingredients, processing time, and energy.
Find the Right Mixing Solution for Your Process
Inefficient mixing can lead to unnecessary product waste, longer processing times, and increased operating costs. The right equipment can make a measurable difference in production efficiency and overall operating expenses.
Crane Engineering works with leading equipment manufacturers like Fristam to help food and beverage processors identify solutions that improve performance and support their production goals.
Looking to improve your mixing process? Contact Crane Engineering to discuss your application and find the right solution for your operation.
These Stories on Mixing
Headquarters and Service Center
Located outside Green Bay, WI
707 Ford St,
Kimberly, WI 54136,
United States
920-733-4425
OptiFlow Design and Build Center
1002 Truman St,
Kimberly, WI 54136,
United States
920-733-4425
Burnsville Service Center
12265 Nicollet Ave,
Burnsville, MN 55337,
United States
952-444-1949
Grand Rapids Service Center
26489 Industrial Blvd,
Cohasset, MN 55721,
United States
952-444-1949
© Copyright 2026. Crane Engineering. All Rights Reserved. Privacy Policy.