Gear pumps are best suited for high viscosity applications. When the fluid viscosity decreases, slip increases.
Slip is when product recirculates from the discharge to the suction side as it escapes through machined clearances while the pump tries to progress it forward. Slip is generally not a big issue, but can cause some annoying problems with some fluids, such as chocolate, adhesives. (You can read more about slip in a previous post, What is a Suckback on a Gear Pump?)
This illustration from Viking Pump shows how slip travels backwards through a gear pump.
The amount of slip is determined by both the fluid’s viscosity, as well as the discharge pressure. A thin fluid with a low viscosity can squeeze through the clearances more easily than the thicker fluids. High discharge pressure can force thinner fluids back through the pump, also causing more slip.
Therefore, because thin fluids slip, the efficiency of the pump decreases as less product is progressed with the forward movement, hence the lower flow rate.
To get the most efficient performance from your gear pump, ensure the pump is properly sized for your application, the clearances are properly set for the fluid’s viscosity, and the discharge pressure is low enough that it won’t force fluid back into the pump.
Think your gear pump could be more efficient? Ask us about it! We gladly provide technical assistance to businesses and municipalities in Wisconsin and upper Michigan.